• Hotline: +86 13625297051
Hello Guest!
Your Cart

Original Fiberfox Mini 4S Clad Alignment Fusion Splicer - TheFO.com

Original Fiberfox Mini 4S Clad Alignment Fusion Splicer

Out of stock
Only 0 left
Mini 4S

Fastest Splicing Time
• 7 sec with single mode fiber (quick mode)
• 16 sec Heating time
• 9 sec with continuous heating mode
• Comes with 2 Battery Packs
• Full Touch Screen
• SOC Compatible

Splicing Method
Active Alignment DAA(Digitalized Active Alignment)
Average Loss
SM(0.03dB) / MM(0.01dB) / DS(0.05dB) / NZDS(0.05dB) / G.657(0.03dB)
Return Loss
Splice Time
12s average SM / SM 7s Quick mode
Electrode Lifespan
>3,500 arcs
Applicable Fiber
SM(ITU-T G.652, MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655), IT-G657A, IT-G657B, 0.25mm, 0.9mm, 2.0mm, 2.4mm, 3.0mm, FLAT(indoor cable)
Cleaved Length
Coating Diameter < 0.25mm = 5-16mm, Coating Diameter > 0.25mm = 8-16mm minimum
Coating Diameter
Cladding Diameter
Heating Programs
Factory installed mode : 3, User installable mode : 23
Heating Time
Typical 18s
Protection Sleeve
40mm, 60mm, SOC-3.0, SOC-0.9
Data Output
Micro HDMI-USB master device
Splice Programs
8 user modes, User installable mode : 70+
Splice Memory
Up to 2000 records
Typical 200 Cycles (Splice & Heat) / single battery
Power Supply
AC 100-240V input or DC 9~14V
Color 4.3’’ LCD monitor, with Touch Screen (Tempered Glass)
2 CCD camera system
XY : 150 times , X/Y : 300 times
Fiber Display
X/Y or XY, single X.Y
4.8 x 4.88 x 5.4 (in)
Wind Protection
The max wind speed 15m/s
Operating Environment
Elevation 0-5000 meters, 14~140˚F, 0~95% relative humidity
Storage Condition
Temperature -40 to 176˚F, 0~95% relative humidity, battery -4~86˚F
Pull Test
1.96~2.25N (standard)


Write Your Own Review
You're reviewing:Original Fiberfox Mini 4S Clad Alignment Fusion Splicer
Your Rating