• Hotline: +86 13625297051
Hello Guest!
Your Cart

JILONG Fusion Splicer KL-280E - TheFO.com

JILONG KL-280E Fusion Splicer Kits Core-Core Alignment Optic Fiber welding Machine

In stock
100% of 100
  • Buy 3 for $1,095.00 each and save 0%

• 3-Year Extended Warranty

• 4 Motors Real Core Alightment

• Fully ruggedized for shock, dust, and moisture

• 5200mAh High capacity Li battery with 300 splices/shrinks per charg

• Fiber Cleaved length - 8 - 16mm (Coating Diameter: 250um)

• 8s splice in SM Quick Mode, 18s heat shrink time



The JILONG KL-280E is a portable, two camera, 4 motors, core alignment fusion splicer. 8-second splice time and 18-second shrink time offers unmatched speed and productivity, The extended-life battery supports about 300 splices and heat cycles per charge. Long-life electrodes lasting 5,000 splices(rechareable), help minimize downtime for replacement and stabilization.  It's widely used in the short-distance and trunk line network, and can be compatible with the FTTX and Access network installation.


• Core-Core alignement by PAS technology

• Fiber core can be display clearly

• Single X or Y view and X&Y view simultaneously

• Real-time & auto control of ARC power

• Auto check &display quality of cleaved end face

• Low splice loss control technology

• Auto compensation of low air pressure

• Software update via USB interface


Splice Method Core Alignment
Applicable Fibers SM(ITU-T G.652&G.657) / MM(ITU-T G.651) / DS(ITU-T G.653) / NZDS(ITU-T G.655)
Compatible Fiber/Cable 0.25~3.0 mm / indoor cable
Fiber Holder Replaceable (Universal: FH-60, SOC Holder: FH-SOC(optional))
Fiber Diameter Cladding: 80-150μm,Coating: 100~1000μm
Fiber Cleave Length 8~16 mm
Splice mode Max 128 modes
Typical Splice Loss SM: 0.02dB / MM: 0.01dB / DS: 0.04dB / NZDS: 0.04dB / G.657: 0.02dB  ★①
Return Loss ≥60dB
Splicing Time SM Quick mode : 8 sec / SM Average: 15 Sec.
Estimated Splice Loss Available
Heating Time Quick mode 18 sec.(SM G652 250μm 40mm Sleeve) adjustable
Protection Sleeve Length 20mm, 30mm, 40mm, 50mm, 60mm
Heat Programs Max 32 modes
Battery 5200mAh Battery Capacity, Typical 300 Cycles (Splice&Heat) per Charge ★②
Electrode Life 5000 arcs, can be extended by using an electrode grinder  ★③
Auto-start Splice / Heating
Automatic Fiber Identification /
Automatic ARC Identification Automatic arc calibration by air pressure and temperature
Results Storage The last 10,000 splice records and 2,000 result images
Tension Test 1.96~2.25N
Operating Condition Altitude: 0~5000m, 0~95% relative humidity, -20~50°C, Max Wind 15m/s
Storage Condition 0~95% relative humidity, -20~60°C
Display 4.3” color high resolution (800 x 480) display
Fiber Magnification X, Y, XY, X/Y : 320X Magnification
Power Supply AC Input 100-240V, DC Input 9-14V
Terminal USB2.0
Weight 1.6kg without battery / 1.9kg with battery
Size 138H x 163W x 140D mm (including rubber bumper)

★①  With identical fibres(in room temperature). Measured by cut-back method relevant to ITU-T and IEC standards.

★②  Splice & Heat cycles may vary depending on the battery status and the operating environment.

★③  Electrode life may vary depending on the operating environment.

Package Included:





KL-280E Fusion Splicer

1 pc


Fiber Cleaver

1 pc


Fiber Stripper

1 pc


Carrying Case

1 pc


Spare Electrodes

1 pair


Cooling Tray

1 pc


Cleaning Tools

1 pc



1 pc


P.S Cord

1 pc


USB Line

1 Pair


Write Your Own Review
You're reviewing:JILONG KL-280E Fusion Splicer Kits Core-Core Alignment Optic Fiber welding Machine
Your Rating