• Hotline: +86 13625297051
Hello Guest!
Your Cart

INNO View 500 Fiber OTDR - TheFO.com

INNO View 500 SM Fiber OTDR & View 7 SM MM Core Alignment Fiber Fusion Splicer

Out of stock
Only 0 left
VIEW 500

● The World’s Fastest Booting Time
● SOLA, Simplify The OTDR Test Process
● 7” Touch Screen with Smart GUI
● 8G Internal Storage with Internal SD Card and External USB Memory Built-In VFL and Light Source
● Ultra High Capacity Battery

Working Condition: Perfect
Condition: Brand NEW
Calibrated: Yes

Inno Instruments View 500 SM Fiber Optic OTDR
The VIEW500 OTDR is used in the installation and maintenance of fiber optic cables. Features of the VIEW500 OTDR include high precision test capabilities, fast response times, and easy to learn operation. The multi-point capacitive touch screen allows for user-friendly operation. The VIEW500 offers accurate and fast test results and creates a report automatically. The VIEW500 is equipped with an industrial grade CPU for creating and storing test results.


• SOLA (Smart Optical Link Analyzer

• 7” Touch Screen with Smart GUI

• 8GB Internal Storage with Internal SD Card & External USB Memory

• Built-In VFL, Light Source and OPM

• Fast Booting Time

• Ultra-High Capacity Battery

OTDR mode allows for measuring distance, loss, reflectivity, attenuation and accumulation loss on a fiber optical link.

VFL allows for finding direct fault locations in fiber test dead zones or performing fiber core calibration in multi-fiber cables.

OPM is used for measuring the absolute optical power meter or relative optical power loss through the span of the optical fiber.

SOLA is an application for the OTDR, designed to simplify OTDR test process without the need to configure the parameters or analysis while parsing multiple complex OTDR curves.

Fiber end tester (peripheral required) is mainly used to test the cleanliness and flatness of the fiber end face.

Invisible light source (1310 or 1550ns) can provide the following types of light, including CW light, 1kHz light, 2kHz light, 1kHz blink light, 2kHz blink light.

VIEW500 offers the ultra-high battery capacity of 7800mAh.


Display 7 inches, High Brightness TFT LCD, resolution of 800×480
Distance unit m / km / mile / ft
Dynamic range 35dB / 33dB (1310nm / 1550nm)
Measurement range (km) 1.3, 2.5, 5, 10, 20, 40, 80, 120, 160, 360km
Measurement range (mile) 0.81, 1.55, 3.11, 6.22, 12.4, 24.8, 49.6, 74.6, 99.4, 223.7 mile
Pulse width 5ns, 10ns, 20ns, 50ns, 100ns, 200ns, 500ns, 1μs, 2μs, 10μs, 20μs
Event dead zone 0.8m
Attenuation dead zone 4m
PON dead zone 40m
Distance accuracy ±(1m+Distance×2.5×10-5 +Sampling resolution)
Loss scale linearity ±0.1dB or ±0.05dB / dB
Sampling points 160,000 points
Splitting ratio Up to 1:64 splitter
Resolution 0.04m ~ 10.24m
Battery capacity Operating Time : Up to 12hours
File format SOR(Telcordia), BMP, JPG
External connection USB 2.0
Compatible connector APC(FC, SC, LC), UPC(FC, SC, LC, ST)
Power supply AC Input 100-240V, 50-60Hz / DC Input 19V, 3.42A
VFL Distance Up to 15km
VFL Module Operating wavelength: 650nm ±10nm, Universal interface: 2.5mm
VFL Output power 20mW
Light source Operating wavelength: 1310nm / 1550 nm ±10nm
Light source output power -5dBm
Optical power meter Wavelength calibration: 850 / 1300 / 1310 / 1490 / 1550 / 1625 / 1650nm
Power range (OPM) -70 to +6dBm
Accuracy (OPM) 0.01dB
Unit display for OPM dB, dBm, uW
Power cable / AC Adapter ACC-25 / JS-180300
Dimension 7.08H x 10.70W x 2.44D inches (180H x 272W x 62D mm, excluding rubber bumper
Weight 4.19pounds (1.90kg with battery)
Operating conditions -10~50℃
Storage conditions -20~60℃,
Relative humidity 0~95% (Noncondensing)


Write Your Own Review
You're reviewing:INNO View 500 SM Fiber OTDR & View 7 SM MM Core Alignment Fiber Fusion Splicer
Your Rating