• Hotline: +86 13625297051
Hello Guest!
Your Cart

Ilsintech Swift KR7 for Ribbon Fiber Fusion Splicer - TheFO.com

Ilsintech Swift KR7 for Ribbon Fiber Fusion Splicer

Out of stock
Only 0 left

• Internet remote access maintenance
• 4.3-inch color LCD monitor with touch screen & bidirectional operating
• Powerful lithium polymer battery with large capacity
• User friendly GUI
• Resistance to shock, dust and water
• Built-in dual sleeve heater


Category Description
Fiber alignment

Fixed V-Groove(Clad to Clad)

Applicable type of fibers

SM(ITU-T G.652), MM(ITU-T G.651), DS(ITU-T G.653), NZDS(ITU-T G.655)

Fiber count

Single fiber, 2~12 fiber

Applicable fiber dimensions

Single: Cladding diameter 125μm, Coating diameter 250, 900μm Ribbon: Cladding diameter 125μm, Ribbon fiber thickness 0.25 to 0.40mm

Fiber setting and cleaved length


Splicing modes

Splice mode: 100, Heat mode: 100

Typical splice loss

SM: 0.05dB, MM: 0.02dB, DS: 0.08dB, NZDS: 0.08dB
Return Loss

> 60dB

Splicing Time

Typical 16sec with standard SM(ITU-T G.652)

Splice loss estimate


Sleeve heating time

1~2 core 20sec, 4~12 core 50sec

Applicable protection sleeve

1.6in, 2.4in(fiber), Micro

Storage of splice result

The last 10,000 results to be stored in the internal memory.(Image 10,000 results)

Tension test


Operating condition

Altitude: 5,000m above sea level, Temperature: -14°F~122°F, Humidity: 0~95%, Wind: 15m/s, non-condensing, dust proof, water proof, shock proof

Storage condition

Temperature: -40°F~176°F, Humidity: 0~95%


5.6(W) x 6.4(L) x 5.7(H)in (Including rubber)


4.4Ib(Including battery 5.5Ib)

Viewing method and display

Two CMOS cameras and 4.3-inch color LCD monitor with touch screen

Fiber view and magnification

20X, MAX 55X

Power supply

DC Lithium polymer battery(DC 14.8V, 6000mAh), 100~240V AC Adapter

No. of splice cycles with battery


Electrode life

More than 1,500 times


USB, External Power (DC 12V Available for car cigar jack) DC Output 13.2~16.8V


Product Includes
(1) Fusion Splicer
(1) AC Adapter
(2) Sleeve Loader
(1) Spare Electrode
(1) Battery Pack
(1) Alcohol Dispenser
(1) Cooling Tray
(1) Holder
(1) Manual Stripper (DC)
(1) Cleaver
(1) DC-Output Cable
(1) Tool Box
(1) User Manual
(1) Carrying Case

Write Your Own Review
You're reviewing:Ilsintech Swift KR7 for Ribbon Fiber Fusion Splicer
Your Rating