• Hotline: +86 13625297051
Hello Guest!
Your Cart

Fujikura 62S Fusion Splicer - TheFO.com

Fujikura FSM-62S Welding Fusion Splicer with CT-08 Cleaver and other accessories

Out of stock
Only 0 left

The Fujikura 62S+ core alignment model fusion splicer is an ideal choice for those that prefer the traditional non-automated operation method. A conventional flip open style wind protector and non-motorized tube heater reduce the complexity of the splicer without substantially increasing total cycle time.

• Includes: BTR-09 Battery, DCC-18 Battery Charge Cord, CT-08 Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S21A Sheath Clamp, Sleeve Loader, USB Cable, Alcohol Pot, Screwdriver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC-24 Transit Case with Carrying Strap
• 5,000 splices electrode life 23 second tube heating time with standard sleeves
Fully ruggedized for shock, dust and moisture Li-ion battery with 200 splices/shrinks per charge
• 5 mm cleave length for splice on connector or small package needs Sheath clamp or fiber holder operation
• Internet software upgrades Multi-function transit case with integrated workstation


Applicable Fibers Single-mode SM (G.652 and G.657), Multimode MM (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter 80 μm to 150 μm
Coating Diameter 100 μm to 1,000 μm
Fiber Cleave Length 5 to 16 mm
Typical Average Splice Loss 0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS
Splicing Time ULTRA FAST mode — 6 seconds; SM FAST mode — 7 seconds; SM AUTO mode — 10 seconds with SM fiber
Arc Calibration Method Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes 100 preset and user programmable modes
Splice Loss Estimate Based upon dual camera core axis alignment data
Storage of Splice Result Last 10,000 results stored in the internal memory
Fiber Display X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification 320X for single X or Y view, or 200X for X and Y view
Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor
Tube Heater Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time Typical 23 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves, 15 seconds with slim 60 mm and 40 mm sleeves
Protection Sleeve Length 60 mm, 40 mm, micro
Splice/Heat Cycles with Battery Typical 200 cycles with power save functions activated
Electrode Life 5,000 Arc Discharges
Power Supply Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
Terminals USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03
Wind Protection Maximum wind velocity of 15 m/s (34 mph)
Operating Conditions 0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test 1.96 to 2.25N
Dimensions, W × D × H 146 × 159 × 150 mm / 5.75 × 6.25 × 5.9 inches
Weight 2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery


Write Your Own Review
You're reviewing:Fujikura FSM-62S Welding Fusion Splicer with CT-08 Cleaver and other accessories
Your Rating